Home > Knowledge > Content
Category requirements for poplar core brown film faced plywood
- Feb 07, 2019 -

1.LG high gloss film
The surface effect is crystal clear, colorful, and does not change color for a long time. Soft touch, colorful surface color, environmental protection, moisture proof, anti-corrosion, easy to clean, light weight, good fire resistance. The best laminating products are currently available at high prices and have a life span of 20-30 years.

2. Other imported membranes
Domestic pearl-coated aluminum gusset plate, imported pearl-coated aluminum gusset plate, LG pearl-coated aluminum gusset plate (coated aluminum gusset plate gradually increases service life and performance)

3. Domestic film
The film thickness is generally between 0.1 and 0.3 mm. The thickness of the substrate of a well-known brand is generally between 0.1 and 0.2 mm.
The board has a thicker visual effect, but it is not as thick as possible. It is enough for 0.6 mm or more. The thickness of the coated board of the well-known brand is about 0.7 mm. The easiest way to determine the thickness is to pick it up and see if the board is tough. Some merchants say that their boards are thick, but they tremble when they are shaken; some boards have thicknesses, but a large percentage is the thickness of the covered film. The thickness of the film can be observed from the kerf of the gusset. However, the exact thickness must be measured with a caliper. The visual or hand error is better.


Copyright © Wuxi TN Wood Co.,Ltd All Rights Reserved.