Home > Knowledge > Content
Finishing and dewatering of laminated MDF board
- Nov 22, 2018 -

The Laminated MDF board is easy to be finished in the process of operation, and various paints and coatings can be uniformly applied to the MDF, which is the preferred substrate for the paint effect. The MDF is also a beautiful decorative plate. Various veneers, printing paper, PVC, adhesive film, melamine impregnated paper and light metal sheets can be finished on the surface of the MDF.

 

Laminated MDF board hard MDF can be punched and drilled to form sound absorbing panels for use in architectural decoration projects. Excellent physical properties, uniform material, no dehydration problems.

 

Laminated MDF board needs to keep its MDF dry and clean during use. Do not use a large amount of water for rinsing to a certain extent. To a certain extent, pay attention to avoid partial long-term immersion of MDF. If the MDF has oil stains and stains, it should be cleaned in time. It can be treated with warm mild neutral detergent and warm water. It is best to use special MDF cleaning solution for MDF cleaning. Do not touch the surface of the MDF with corrosive liquids such as alkaline water or soapy water, and do not use flammable materials such as gasoline and other high-temperature liquids to wipe the MDF.

 

Laminated MDF board is recommended to place a mat at the door, so as to prevent dust particles from being damaged and damage the MDF; overweight items should be placed smoothly; do not drag when carrying furniture, to lift

 

https://www.tnplywood.com/


Copyright © Wuxi TN Wood Co.,Ltd All Rights Reserved.