Home > Knowledge > Content
Instructions for use and scope of responsibility for marine plywood for waterproof construction building
- Feb 01, 2019 -

1. The marine plywood for waterproof construction building is raised at the bottom of the board material with four pieces of about 100mm rafts at the bottom of the board material. The board should not be placed directly on the ground. The height of the board should not exceed two meters.

2. Marine panels for waterproof construction should be stored away from direct sunlight, dry and ventilated environment.

3. Waterproof building marine board When pasting various surface materials on the surface of the board, please clean the surface of the board with dust, dirt, oil stains, etc., then polish it with 360# woodworking sandpaper, and paste it with professional adhesive for facing materials. If the air humidity is greater than 80%, it is not suitable for the construction of the pasting facing material.

4. When processing marine plates, it is recommended to take several plates before testing before mass production. If it is caused by unnecessary mass production without trial, it is not within the scope of responsibility.

https://www.tnplywood.com/

Copyright © Wuxi TN Wood Co.,Ltd All Rights Reserved.