Home > Knowledge > Content
Process requirements and production process of exterior plywood for wall sheathing
- Jan 21, 2019 -

Wall-sheathed outdoor plywood is derived from a variety of colors during the production process. The most important one is to attach a thin layer of decorative veneer on the surface of the original plywood. Board veneer plywood, referred to as decorative panels or veneers in the market.

Wall-sheathed outdoor plywood is a natural wood veneer veneer and an artificial veneer. Natural wood veneers are veneer veneers made from precious natural wood by shaving or rotary cutting. The artificial thin wood is made of a veneer that is relatively inexpensive to be cut into a wooden board, which is pressed into a wooden side by a certain process, and then cut into a decorative thin wood with a beautiful pattern.

Wall veneer outdoor plywood veneer veneer veneer veneer is often a good pattern, high-priced tree species, such as cedar, oak, rosewood, ash. However, it should be stated in the trade name, such as "Cypress wood veneer plywood", or "ash ash slice plywood", or "cherry wood veneer". In several kinds of scales, “sticking”, “slicing” and “decorating board” all reflect the basic characteristics of “decorative board”.



Copyright © Wuxi TN Wood Co.,Ltd All Rights Reserved.