Home > Knowledge > Content
Waterproof performance and use requirements of moisture-resistant marine plywood
- Nov 23, 2018 -

The moisture-resistant marine plywood is mainly made of Taier waterproof glue (phenolic glue) when it is used, and it reaches the environmental protection F4 star standard. The ocean board has excellent weather resistance and can be boiled for 72 hours without boiling. The weather resistance of the moisture-proof marine board has passed the authoritative inspection of the National Wood-based Panel and Wood Bamboo Products Quality Supervision and Inspection Center.

When the cargo is unloaded, it will be placed at the bottom of the plate with four rafts of about 100mm. The plate should not be placed directly on the ground. The height of the plate should not exceed two meters. The moisture-proof marine board should be stored away from direct sunlight, dry and ventilated environment.

When the moisture-proof marine board is pasted with various finishing materials on the surface of the board, please clean the surface of the board with dust, dirt, oil stains, etc., then polish it with 360# woodworking sandpaper, and paste it with professional adhesive for the facing material. If the air humidity is greater than 80%, it is not suitable for the construction of the pasting facing material.

When processing moisture-resistant marine plywood, it is recommended to take a few sheets of paper before testing in batches. If it is caused by unnecessary mass production without trial, it is not within the scope of responsibility.



Copyright © Wuxi TN Wood Co.,Ltd All Rights Reserved.